CNet Technology CNIG904S Network Router User Manual


 
CNet Technology Inc PC Configuration
25
Macintosh Configuration
You can access the Internet via the Broadband Router. The procedure is as follows.
1. Open the TCP/IP Control Panel.
2. Select Ethernet from the Connect via pop-up menu.
3. Select Using DHCP Server from the Configure pop-up menu. The DHCP Client ID field
can be left blank.
4. Close the TCP/IP panel, saving your settings.
Note:
If using manually assigned IP addresses instead of DHCP, the only change required is to
set the Router Address field to the Broadband Router's IP Address.