Filter
Top Products
Chapter 3: Setting up the Printer16
A760 Two-Color Thermal/Impact Hybrid Printer: User Guide 189-9200303 Rev. D A760-D100 10/04
Chapter 3: Setting up the Printer
Unpack the printer
Check the packing list
Save all packing materials in case you need to repack
the printer for shipping or storage. Before installation,
check that all the items on this list have been shipped
(printers shipped in bulk may not include all these
items):
• Printer (enclosed in a plastic bag with foam pack)
• Thermal receipt sample paper roll (inside receipt
bucket)
• Test printout protecting the printhead (inside receipt
bucket)
• Cardboard support for cantilever (on slip table)
• Foam restraint for carriage (behind front cover)
• Power supply with cable connecting to printer and
power supply cord connecting to power outlet (only
if ordered with the printer)
• Ribbon cassette
• Installation quality report card: complete and return
to TPG, Inc.
• A760 ColorPOS
®
Two-Color Thermal Receipt and
Impact Slip Printer: Setup Guide
• RS-232C Communication cable from host to printer is
available if ordered with printer. Other cables must be
obtained by the user.
To report any missing materials, or to report a printer
that was damaged during shipping, call your supplier or
call an TPG, Inc. representative at:
Sales/General Information 1(800)732–8950
Service/Operational Questions 1(877)209–0156
– or –
You can visit our Web set at http://
www.TPGprinters.com and contact us by email.
1 Click on “Contact TPG, Inc.” on main page.
2 Click on your region, i.e.: “North America” for USA.
3 In the “TPG, Inc.” box, click on “Click Here to
Contact Us”.
4 Fill in form information on window that comes up.
5 Send.