Filter
Top Products
Chapter 2: About the Printer 15
A760-D100 10/04 189-9200303 Rev. D A760 Two-Color Thermal/Impact Hybrid Printer: User Guide
Exceptions
Print speed and throughput will decline when:
Temperature is less than 25%C.
Energy setting is greater than 100%.
Dot coverage is greater than 25% or the format contains solid horizontal lines.
The printer is waiting for data or on an Ethernet interface network traffic is heavy.
Power setting is equal to 48 Watts.
Options
Connectivity Six standard plug-in printed circuit boards are available depending on the
communication interface required. Interfaces with 9-pin or 25-pin RS-232C only,
USB only, a combination 9-pin RS-232C and USB, an IEEE 1284 parallel or an Ethernet
board can be provided.
Communication cables are available for the RS-232C interfaces (see below).
Power supplies are available in 55-watt or 75-watt versions.
3-pin to 6-pin power connection adapter to allow previous version power supplies
(or terminal cables) to be connected to the A760.
Thermal receipt printer The optional receipt cutter.
Impact slip printer The slip table is available in either standard or an extended size. An extended slip table is
standard with the MICR check reader and flip options.
The Magnetic Ink Character Recognition (MICR) check reader is built into the slip station.
It reads checks that use standard E-13B or CMC-7 MICR fonts.
Check flip option: after reading the MICR line on the front of the check and printing on
the back, the printer is able to flip the check over and print on the face of the check.
Electronics and firmware 2 MB expanded flash memory is available as factory configuration.
Communication cables: RS-232C (9-pin or 25-pin) available
LogoEZ
®
utility Logo and colorization utility is available from your TPG, Inc. representative or
downloadable from www.TPGptinters.com Web site.
Provides a basic two-color and logo format for receipts.