Filter
Top Products
Cognitive's Del Sol desktop printers are available
with a peeler option.The following instructions
supplement the Del Sol Quick Start Guide.
Close Peeler
Press the top of the blue latches
to secure the peeler door in place.
Close the printer as explained
in the Quick Start Guide.
Note: You will hear a click when
the peeler is properly latched.
1
2
1
Peeler Maintenance
To clean the printer follow the maintenance
instructions in the Del Sol Quick Start Guide.
Clean the lower drive roller (A), label taken sensor
(B) and pinch roller (C), with a soft, lint free cloth
saturated with 99% isopropyl alcohol.Remove
adhesive residue on the lower metal pinch
roller (C) every 7,000 to 10,000 inches.
Tip: Press FEED to rotate the platen
one-quarter turn, and clean all sides
of the platen.
Caution! Incorrectly cleaning the printer
will cause permanent damage and void the
printer’s warranty. Cognitive recommends
using a certified cleaning pen for all your
printer's cleaning requirements,
P/N 60-14-00-0002.
Peeler Operating Instructions
Load Media
Remove the first label from
the backing. Slide the
backing under the metal
pinch roller (A) and through
the slot in the peeler door (B).
2
Important: Please read these instructions carefully
as there are operation differences between a
standard Del Sol printer and a peeler equipped model
A
B
C
Open Peeler
Open the Del Sol printer mechanism
as explained in the Quick Start Guide.
Press down on the blue latches on the
front of the printer. The peeler door
opens forward and down to load
the media.
A
B
3
3