Filter
Top Products
5
-2
Upgrading Your Mobile Internet PC
Installing Memory Expansion Modules
`
CAUTION:
It is recommended that you use Compaq memory modules when
expanding memory. The use of non-Compaq memory modules may cause potential
warranty issues.
To properly install memory modules, complete the following steps:
1.
Turn off your computer using the Windows shutdown process.
`
CAUTION:
If you enter Hibernation mode instead of turning off your computer when
adding memory, you will lose data.
2.
Disconnect all power sources and external hardware from your computer.
3.
Remove the battery from its compartment.
4.
Turn your computer over and locate the memory compartment door.
5.
Use a Phillips screwdriver to remove the screw from the memory compartment
door.
6.
Remove the memory compartment door.
7.
Slide
1
and lock
2
the memory expansion module in place.
`
CAUTION:
When installing memory expansion modules, apply gentle, even pressure
when inserting the memory module. Excessive pressure can damage the memory
module.
+
NOTE:
Make sure the memory module is properly seated and snapped into place. If it
is not seated, you may see memory error messages or your computer may not
recognize the memory module.