Filter
Top Products
United States January 2, 2003
Maintenance & Service Guide
Presario 1600 Series Portable Computers
Notice | Preface | Home | Product Description | Troubleshooting | Illustrated Parts Catalog
Removal & Replacement Procedures | Specifications | Connector Pin Assignments | Battery Pack
Removing The Battery Charger Board
Removing
the Battery
Pack
Palmrest
Cover with
Touch Pad
Keyboard
Heatspreader
Status Panel
Interface
Board
Hard Drive
Battery
Charger
Board
CD Drive
Display
Assembly
Plastic
Subpanel
Assembly
CD Drive
Cable
Speaker
Assembly
Modem
Diskette
Drive
Fan
Audio
Assembly
Board
System
Board
Memory
Module
Removing the Screws and the Battery Charger
Board
1.
Prepare
the
computer for
disassembly.
2. Remove
the palmrest
cover with
touch pad.
3. Remove
the
keyboard.
4. Remove
the hard
drives
5. Remove
the stiffener
bracket.
6. Remove
the two
screws from
the battery
charger
board,
unplug the
board from
the system
board, and
lift out of
the chassis
as shown.
Back to
Preparing
the
Computer
for
Disassembly
NOTE:
When replacing the battery charger board, ensure the pins are
aligned with the connector on the system board.
privacy statement
legal notices