Filter
Top Products
Dip Switch
United States June 27, 2004
COMPAQ
STORE | PRODUCTS | SERVICES | SUPPORT | CONTACT US |
SEARCH
Maintenance & Service Guide
Presario Series
Models : 1270, 1670, and 1675
| Home Page | Notice | Preface | Product Description | Troubleshooting
Illustrated Parts Catalog | Removal & Replacement Procedures | Specifications
Pin Assignments | Battery Pack Operations
For Models: 1670 and 1675
CAUTION: Only change settings 1-5 on SW1 . Settings 6-10 vary by model and should not be changed when
replacing the system board. Ensure the dip switch voltage settings (SW1
and SW3 ) on the system board are correct
for the computer model and processor voltage marked on the processor chip. If the system board dip switch voltage
settings are not correct, damage may occur to the computer and/or system board.
NOTE:
The black area on the dip switch indicates the position of the switch.
Return to Removal & Replacement Procedures
1.800.AT.COMPAQ
privacy and legal statement
file:///C|/SERVICE%20MANUALS/COMPAQ%20_%20checked...RESARIO%201270,%201670,%20and%201675/step161.html6/27/2004 2:46:44 AM