Compaq 420C 486 DX4/75 MHZ 350 MB 4 MB 10.4 Personal Computer User Manual


 
Replacing the Memory Expansion Board
To replace the memory expansion board, follow these steps:
1. Align the two connectors on the memory expansion board with the
corresponding connectors on the system board.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
To prevent damage to the memory expansion board, do not apply pressure to
the middle of the board. Press only in the area directly over each
connector.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
2. Insert the memory expansion board into the compartment and press the
memory expansion board down. Apply pressure directly over each
connector. Ensure that both connectors snap into place (Figure 3-16).