Compaq 420C 486 DX4/75 MHZ 420 MB 8 MB 10.4 Personal Computer User Manual


 
3. Slide the new handle on the crankshaft until the handle seats.
4. To secure the new handle to the crankshaft, replace the screw behind
the handle.
Chapter 3.31 Monitor Support Cover
This section contains replacement procedures for the foot on the monitor
support cover.
To replace the foot, follow these steps:
1. Turn the monitor support cover top-side down.
2. Remove the top layer from the foot to expose the adhesive strip
(Figure 3-198).
3. Position the foot adhesive-side down on the exposed metal and press
(Figure 3-198).