Filter
Top Products
Compaq DPW Enhanced a-Series & au-Series
6
Step 5a Internal Storage
(continued)
Packaged systems include a 9.1 GB Wide Ultra-2 SCSI hard disk drive (SN-PBXRW-SC).
SCSI disk drives
SN-PBXRW-SC
9.1 GB Wide Ultra-2 LVD SCSI 7200 RPM hard disk drive, 1.0 inch drive
SN-PBXRW-TB
18.2 GB Wide Ultra-2 LVD SCSI 7200 RPM hard disk drive, 1.0 inch drive
SN-PBXRW-RB
4.3 GB Wide Ultra-2 LVD SCSI 10K RPM hard disk drive, 1.0 inch drive
SN-PBXRW-VA
9.1 GB Wide Ultra-2 LVD SCSI 10K RPM hard disk drive, 1.0 inch drive
SN-PBXRW-WA
1
18.2 GB Wide Ultra-2 LVD SCSI 10K RPM hard disk drive, 1.6 inch drive (includes fan kit)
SN-PBXRW-WB
18.2 GB Wide Ultra-2 LVD SCSI 10K RPM hard disk drive, 1.0 inch drive
SN-PBXRW-XA
36.4 GB Wide Ultra-2 LVD SCSI 10K RPM hard disk drive, 1.6 inch drive
1.
Maximum one per system, supported in 5.25-inch removable media bays only.
Removable Media
Systems include one 5.25-inch 32X CD-ROM drive and supports two additional 5.25-inch removable media devices.
Note: 5.25-inch removable media bays also support hard disk drives.
Maximum of one additional ATAPI device supported per system.
SN-PBXRV-AA
6X/32X ATAPI DVD-ROM Drive (Data Device only) (UNIX, Windows NT only)
SN-PBXRX-CA
100 MB ATAPI ZIP Drive
SN-TLZ10-LK
12/24 GB 4mm DAT internal SCSI tape drive, 1.6-inch front accessible bay
SN-TLZ09-LK
4/8 GB 4mm DAT internal SCSI tape drive, 1.6-inch front accessible bay
Step 5b External Storage
Tabletop DAT Tape Drives
Tabletop tapes require SN-KZPBA-CA SCSI adapter, they are not supported on same adapter as internal storage.
TLZ09-DC
4/8 GB 4mm DAT external tabletop SCSI tape drive.
Cables/Adapters Required: Wide to Narrow terminator adapter included.
Requires BC09D-03/06 (3/6 foot) 50 pin HD to 50 pin LD cable.
DS-TLZ10-DB
12/24 GB 4mm DAT external tabletop SCSI tape drive.
Cables/Adapters Required: Requires BN36A-0B Wide to Narrow terminator adapter.
Requires BC09D-03/06 (3/6 foot) 50 pin HD to 50 pin LD cable.
Controllers/Adapters
au-Series systems running Tru64 UNIX V4.0D and OpenVMS 7.2-1 support one RAID controller (SN-KZPAC-xx).
a-Series and au-Series systems support two additional UltraSCSI adapters for a system maximum of three (including the
onboard adapter). The second optional controller must be installed on the secondary PCI bus.
Maximum controllers/adapters supported per system a Series au Series
SN-KZPBA-CA
1
Q-Logic 1040B Wide Ultra SCSI adapter—uses 1 PCI 32-bit slot 2 2
SN-KZPBA-CB
1
1 port UltraSCSI Differential adapter—uses 1 PCI slot 2 2
SN-KZPAC-AA
2
1 port RAID controller, 4MB EDRAM cache—uses 1 PCI 32-bit
slot
11
3
SN-KZPAC-CA
2
3 port RAID controller 4MB EDRAM cache—uses 1 PCI 32-bit
slot, third port uses one additional PCI bulkhead slot, requires
BN31K-0E bulkhead assembly kit and SCSI cable.
11
3
SN-KZPAC-CB
2
Same as –CA with 8MB EDRAM cache 1 1
3