Compaq 3132 Network Card User Manual


 
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
QUICKSPECS
7-16 1Q1999 North America – Networking Products
Compaq NC3132
Fast Ethernet Module
NETWORK MANAGEMENT
Standards-based
The NC3132 supports the following industry network management standards to work with a broad spectrum of
software utilities.
SNMP
DMI 2.0
Web-Based Enterprise Management (WBEM)
Unattended Install
Server Integration
Compaq’s SmartStart configuration utility includes setup support for the NC3132 so that it can be configured as part
of the SmartStart configuration process in Compaq servers. Compaq Insight Manager can recognize the NC3132
individually or in port bonded teams, and can collect and report SNMP statistics on NIC events. The Compaq Network
Management System (CNMS) can also collect and report SNMP statistics on the NC3132.
Integrated Management Log (IML) support is provided by the NC3132 for critical event logging on Compaq servers.
CPQSET+
The CPQSET+ enhanced installation utility supports the NC3132 to allow the user to run initial diagnostics and
configure NIC teams for ALB or other high-availability options.
Diagnostic LEDs
For each port, LEDs show link integrity, network speed, and network activity at a glance for easy troubleshooting.
SPECIFICATIONS
General Specifications Both ports IEEE 802.3/802.3u 10Base-T and 100Base-
TX compatible
Single RJ-45 connector for each port
Support for IEEE 802.3u Auto-Negotiation
Full or half duplex capable at 10 or 100 Mbps on both
ports
IEEE802.3x flow control support
Power and Environmental Specifications
Operating 32º - 131ºF (0º – 55ºC) temperature
10% – 90% relative humidity
Non-operating –85º – 185ºF (–65º – 85º C) temperature
5% – 95% relative humidity
Power requirement 800 mA @ 5V max
Emissions standards FCC Class A
FCC Class B
Safety compliance CE Mark
Dimensions 5.7”L x 3.9”W (14.5 x 9.9 cm)
Operating System Support Microsoft Windows NT 3.51 and 4.0
SCO UnixWare 7.x 32-bit
SCO UnixWare v2.x
NetWare Server 3.12, 4.1x, and 5.x
Open Server 5.x