Filter
Top Products
5–26 Maintenance and Service Guide
Removal and Replacement Procedures
3. Remove the two M2.5 × 4.5 screws securing the diskette
drive to the top cover 1 (Figure 5-15).
4. Remove the tape adhering the diskette drive and TouchPad
cables to the top cover 2.
5. Remove the diskette drive from the top cover 3.
Figure 5–15: Removing the Diskette Drive
Reverse the above procedure to install the diskette drive.
✎
When installing the diskette drive in the top cover, make sure the
tab in the front right corner of the diskette drive fits into the slot in
the front right corner of the top cover.