Filter
Top Products
English81188
English - 11
English
♦♦♦
NUTEK VESA state LED indicator Power Consum ption
Normal operation On Green < 130W
Power Saving
Position A1
Suspend Am ber < 15W
Power Saving
Position A2
OffAmber <8W
Energy Declaration
This monitor is equipped with a function for saving energy which supports the VESA
Display Power Management Signaling (DPMS) standard. This means that the monitor must
be connected to a computer which also supports the VESA DPMS standard to fulfill the
requirements of the NUTEK specification 803299/94. The time settings for switching to a
power saving mode are adjusted from the system unit by software. From the first
indication of inactivity to power saving position A2, the total time must not be set to more
than 70 minutes.
1. VESA Power-Management Proposal 2. Power Consumption (120/230 Vac)
CONTROLS AND ADJUSTMENTS
V ESA DPMS Standard
H. sync V . sync V ideo State
OffOnBlank Stand-by
On OffBlank Suspend
OffOffBlank O ff
According to TCO guidelines, the optimum TCO readings are measured when brightness
and contrast are adjusted to their center position.