Filter
Top Products
Product Features
2. Remove the cover plate 1 from the monitor base by placing
your fingers in the opening on the bottom of the base and
pulling upward, then pulling out to remove the cover.
3. Remove the back panel 1 from the monitor by pushing the
bottom tabs upward and pulling out to remove the back panel.
4. Disconnect and remove the signal and power cables from the
back of the monitor.
5. Remove the four screws 3 as shown in the following
illustration.
Removing the Monitor Base
CAUTION: Ensure that the bottom of the monitor base is positioned over
a table or desktop before removing the base from the monitor.
6.Remove the monitor base 2 from the monitor.
10 Compaq TFT5030 Flat Panel Monitor User’s Guide