Filter
Top Products
Specifications
1-21
Writer: M. Silvetti Saved by: Marianne Silvetti Saved date: 06/24/98 4:38 PM
Pages: 7 Words: 1193 Template: j:\template\commercl\commapp.dot
File Name CApp_en.doc Part Number 308012-001
Country-Specific Requirements
Power Cord Set Requirements: By Country
Country
Accredited
Agency
Applicable Note
Numbers
Australia EANSW 1
Austria OVE 1
Belgium CEBC 1
Canada CSA 2
Denmark DEMKO 1
Finland FIMKO 1
France UTE 1
Germany VDE 1
Italy IMQ 1
Japan MITI 3
The Netherlands KEMA 1
Norway NEMKO 1
Sweden SEMKO 1
Switzerland SEV 1
United Kingdom BSI 1
United States UL 2
Notes:
1. The flexible cord must be <HAR> Type HO5VV-F, 3-
conductor, 0.75 mm
2
conductor size. Power cord set fittings
(appliance coupler and wall plug) must bear the certification
mark of the agency responsible for evaluation in the country
where it will be used.
2. The flexible cord must be Type SVT or equivalent, No. 18
AWG, 3-conductor. The wall plug must be a two-pole
grounding type with a NEMA 5-15P (15A, 125V) or NEMA
6-15P (15A 250V) configuration.
3. The appliance coupler, flexible cord, and wall plug must bear a
"T" mark and registration number in accordance with the
Japanese Dentori Law. The flexible cord must be Type VCT or
VCTF, 3-conductor, 0.75mm
2
conductor size. The wall plug
must be a two-pole grounding type with a Japanese Industrial
Standard C8303 (15A, 125V) configuration.