Filter
Top Products
1-18 Appendix
Part Number: xxxxxx-001 - Writer: MSilvetti- Saved by: MSilvetti
Pages: 5 Words: 966 Saved date: 09/03/99 12:05 PM File Name:
Power Cord Set Requirements
The monitor power supply is provided with Automatic Line Switching
(ALS). This feature allows the monitor to operate on input voltages
between 100-120V or 200-240V.
The power cord set (flexible cord or wall plug) received with the
monitor meets the requirements for use in the country where you
purchased the equipment.
If you need to obtain a power cord for a different country, you should
purchase a power cord that is approved for use in that country.
The power cord must be rated for the product and for the voltage and
current marked on the product's electrical ratings label. The voltage and
current rating of the cord should be greater than the voltage and current
rating marked on the product. In addition, the diameter of the wire must
be a minimum of 0.75 mm² or 18AWG, and the length of the cord must
be between 6 feet (1.8 m) and 12 feet (3.6 m). If you have questions
about the type of power cord to use, contact your Compaq authorized
service provider.
A power cord should be routed so that it is not likely to be walked on or
pinched by items placed upon it or against it. Particular attention should
be paid to the plug, electrical outlet, and the point where the cord exits
from the product.