Compaq L1502 Computer Monitor User Manual


 
Setting Up the Monitor
User’s Guide 3–7
Å
WARNING: To reduce the risk of electric shock or damage to your
equipment:
Do not disable the power cord grounding plug. The grounding
plug is an important safety feature.
Plug the power cord into a grounded (earthed) electrical outlet
that is easily accessible at all times.
Disconnect power from the monitor by unplugging the power
cord from the electrical outlet.
Do not place anything on power cords or cables. Arrange them
so that no one may accidentally step on or trip over them. Do not
pull on a cord or cable. When unplugging from the electrical
outlet, grasp the cord by the plug.
Removing the Monitor Base
You can remove the monitor base to mount the monitor on a wall,
a swing arm, or other mounting fixture. Read the Caution and
Warning statements below before beginning the procedure.
Ä
CAUTION: Before beginning to disassemble the monitor, be sure
the monitor is turned off and the power and signal cables are both
disconnected. If your monitor has a connected audio cable,
disconnect it.
Å
WARNING: Do not remove the base from the monitor while the
monitor is in the upright position. Lay the front bezel down on a soft
area to prevent it from getting scratched, defaced, or broken. Before
removing the monitor from the base, ensure that the base is set to the
maximum base extension. Attempting to remove the monitor from the
base while upright in the minimum base extension may result in injury
to the user.