Filter
Top Products
DIGITAL-LOGIC AG SMX945 Condensed Manual V1.0A
20
4.1. BIOS Setup
Since the BIOS is auto-configuring during the start-up procedure, normally the user does not enter the BIOS
setup. Manual setup is needed only to change the default settings. Please refer to the driver/software/BIOS
manual “SMX945_BIOS” printed from the CD for the BIOS setup details.
4.2. Boot Up the Operating System and Install the Drivers
Depending on which boot drive is available, boot up the operating system from the CompactFlash, hard disk,
or floppy disk.
To install the drivers, see the driver/software/BIOS manual “SMX945_BIOS” on the Product CD.