Filter
Top Products
Chapter 5 - Setting Up Command Line Management 17
using the IP transport protocol), or anywhere on your network
(if using the IPX transport protocol). Instructions for these
two methods are given in Chapter 4 - CompatiView Software
Installation.
• With CompatiView, basic IP parameters can be set using the
TCP/IP Routing: Ethernet 0 Dialog Box. Use the Save
to/Device option under the File menu to save the changes.
After you have set these IP parameters and saved the changes, you can
use Telnet to access the router from any node on your IP network.
Invoke the Telnet client on your local host with the IP address of the
router you wish to manage.