Filter
Top Products
2. System Reference
SEH-9450-LAS
5
2. System Reference
Specification
Table 2.1. Functional Specifications < 1 / 2 >
Type Specifications
Supported CPU
Intel(R) Core Duo / Core
2 Duo (FSB 533 / 667 MHz)
Cache
Built in CPU
Processor socket
Socket M
Memory (Option)
Up to MAX 4G, DDR2 400 / 533 / 667, 200 pin SO-DIMM Socket X 2 *1
Chipset
Intel(R) 945GME+ ICH7M-DH
BIOS
Phoenix AwardBIOS, PnP support
VGA
Built in Intel 945GME,
One Analog RGB D-Sub 15pin connector.
One LVDS (18bit) I/F: (One box-header 30-pins and one box-header 20-pins connectors)
One SDVO I/F (box-header 30-pins connector) *2
Keyboard / Mouse connector
One PS/2 keyboard/Mouse connector (Bundled the 2 in 1 cable)
Serial I/F
One box-header 10-pin connector (RS-232C)
One box-header 10-pin connector (RS-232C/422/485)
Baud rate: 115,200 - 50 bps (programmable)
Parallel I/F
None
On board expansion bus
Mini PCI bus
LAN Port
1000BASE-T/100BASE-TX, Intel 82573E controller, One RJ-45 connector. *3
Wake On LAN support
IDE I/F
One EIDE ports, up to two IDE devices
One box-header 40-pin connector, support Ultra DMA 33/66/100 *4
The CF card slot and it shares with a Slave port.
SATA I/F
Two Serial ATA 1.0 compliant ports
FDD I/F
None
Compact Flash Slot *5
Type I/II x 1, IDE Slave Master port connection, Support booting *6
SSD Socket
None
USB Port
4ch USB2.0 compliant ports, one box-header 10-pin connector that support 2ch,
Two USB type A connectors support 2ch.
RAID
RAID0, RAID1
Audio
AC97 CODEC., One pin-header 10-pin connector for speaker-out, line-in,
microphone-in.
*1 Max. available memory capacity is 3.1GB. (ECC is not support.)
*2 PCI-E X16 SDVO PORT can’t use at same time.
*3 1000 BASE-T is supported with the Windows 2000 and Windows XP.
*4 IDE port cannot support by UltraDMA66/100 mode at the time of CF card use.
*5 This CF card slot do not have the hot-swap function. The card cannot remove from slot and attach to slot at the
time of a power supply ON.
The card may be damaged if a power supply is turned off at the time of card access.
*6 IDE Slave port can support one drive at the time of CF card use.