Corega CG-WLBARGO Network Router User Manual


 
WLBARGO Manual
14 15
14 15
(4) Click [Gateway] tab, remove all the gateways, and press [OK] to close the window.
(5) Go to [Network] and press [OK] to close the page.
(6) The [Restart the windows] screen will pop-up, press [OK] to restart the PC. If
the PC is not shown this message, restart the PC manually.
3.1.5 Mac OS 8.x~9.x O/S
(1) Open the [TCP/IP] configuration from [Control Panel].
(2) Select [Ethernet Network] in the [connection methods]; select [DHCP server]
in [Configuration], and close this page.
3.1.6 Mac OS X O/S
(1) Go [System Configuration] in Macintosh category.
(2) Open [Network] configuration in [System Configuration]. If there is no
[Network] configuration, select [Display all].
(3) Select [Built-in Ethernet] in [Display] from [Network] window. Select [Use
DHCP] in [Setting] from [TCP/IP].
(4) Press [Apply].