Corega CG-WLAPGMN Network Card User Manual


 
19
WLAPGMN User Manual
19
Beacon Interval
(20-1000)
Default is [100], recommanded don't change it.
DTIM (1-255) Default is [1], recommand don't change it.
Fragmentation
Length (256~2346)
Enter even numbers.
Default is [2346], recommanded don't change it.
RTS Length
(256~2346)
Default is [2346], recommanded don't change it.
Transmit Power Default is [full].
Super Mode
If your Wireless LAN Card supports Super G Mode transmit
rate. You can use this function to increase wireless through-
put. Default is [Disabled].
Radio Wave Default is [On].
eXtended Range Default is [Disabled].
* Note: If any setting has been changed, you have to click [Reboot]-
>[Restart] to save the changes.
<Security Setttings>
A. Setting WEP
1. Click[Advanced]->[Configuration]->[Security Settings]->select
[Shared Key] from [Authentication] tab->setting [Key Table], once
configure completed, click [Apply].