Filter
Top Products
CRADLEPOINT CBA750| USER MANUAL Firmware ver. 1.9.0
© 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 34
5.1 Info
This page displays information about any attached modems.
The amount of information displayed depends on the
particular modem, but generally about a dozen to two dozen
values are displayed. To understand what particular values
such as "Home Address" or "Network Access Identifier"
mean, please review information provided by your carrier. Of
particular interest are the “Signal Strength” readings: these
let you know the quality of the attached modem connection to
your carrier. You may be able to move the location of the
router or modem to increase your signal strength. Please
note that if any of the values are displayed in red, you will
need to correct the condition before you can access the
WAN link across that phone/modem.
If your phone/modem does not support reading diagnostics
such as signal strength while it is connected to the carrier's
network, a "Refresh" button will show up on the page. If you
press this button, any current data connection will be
terminated, new readings will be presented, and a new data
connection will be made. This is equivalent to pressing the
router's external Signal Strength (SGNL) button. Again, note
that the data connection will be lost and any attached
devices will be momentarily interrupted if they are accessing
the WAN using the phone/modem.