Cradlepoint MBR800 Network Router User Manual


 
MBR800
The activated mobile broadband adapter must be
on the MBR800 Supported Devices list. For more
information, go to www.cradlepoint.com/support.
For a Wireless WAN
(Cellular) Connection:
Connect your activated mobile
broadband adapter to the USB port or
the ExpressCard port on the side of the
MBR800.
2
Mobile Broadband Router
Connect Power:
Plug the power adapter into the
power connector on the rear of the
MBR800. Next, plug the adapter into a
wall socket.
1
Power Supply
For a Wired WAN
connection:
Connect one end of the Ethernet
cable to the WAN port on your MBR800.
Connect the other end to your Internet
WAN source, such as cable or DSL modem.
3
Connect Local Wired
Clients:
Connect one end of a standard RJ45
Ethernet cable to a LAN port on the
MBR800 and the other end to a computer.
You may connect up to four (4) comput-
ers.
Continue to the back page for access
information.
4
Parts List:
∙ MBR800 Mobile Broadband Router
∙ AC Power Adapter (12V, 1.5A)
∙ CAT5 Ethernet Cable (1.5 meters)
∙ Warranty Registration Card
∙ Wall Mounting Hardware
· Quick Start Guide (this document)
System Requirements:
∙ Mobile Broadband Data card (USB or ExpressCard) with Active
Subscription, or Supported Phone with Active Tethered Data Plan
∙ Windows 2000/XP/Vista, Mac OS X, or Linux PC
∙ Internet Explorer v6.0, Firefox v2.0, or Safari v1.0 (minimum)
Part Number: 184357-400