Crestron electronic CP-X4014WN Projector User Manual


 
12
1. Connection to the network
1.4.2 Wireless LAN connection set up
Using wireless LAN utility for Windows
®
7 standard.
Wireless LAN initial settings for the projector is as follows.
1.4 Manual network connection setting - Wireless LAN - (continued)
Connection Control : Ad-Hoc
SSID : wireless
Channel : 1
Encryption rating : None
IP address : 192.168.10.254
* You can change these settings via a web browser on your computer or from the
menu of the projector. Refer to the item 3.1.3 Network Settings (
20) or
NETWORK menu in the Operating Guide.
1) Select "Change adapter settings" from the
menu on the left side of the "Network and
Sharing Center" window.
2) Right-click "Wireless Network Connection" to open the
menu, and select "Properties".
(continued on next page)
3) Select "Internet Protocol Version 4 (TCP/IPv4)" and click
[Properties].