Crestron electronic DM-MD8X8 Switch User Manual


  Open as PDF
of 3
 
Crestron Electronics, Inc.
15 Volvo Drive
l
Rockleigh, NJ 07647
Tel: 800.237.2041 / 201.767.3400
l
Fax: 201.767.1903
www.crestron.com
Specifications subject to change without notice. Doc.4774 01/09
All brand names, product names and trademarks are the property of their respective owners.
©2009 Crestron Electronics, Inc.
CCrreessttrroonn DDMM--MMDD88XX88
8x8 DigitalMedia
TM
Switcher
2244AABBGG // EEIIGG 11 –– 44 ((SSLLOOTT 11 –– 22))::
(8) sets of (1) 4-pin and (1) 3-pin 3.5mm detachable terminal blocks;
Comprises (8) DMNet ports with “EIG” power selection ports, each set associated with
a corresponding DM output port on the DM output card in either DM output card slot;
Each DMNet port provides power and communications for a DM device connected via
DM cable;Each EIG port connects to an external power supply‡, or to the internal power
source via a jumper, to power the DM device connected to the corresponding DMNet
port;Maximum Load: 75 Watts (3.13 Amps @ 24 Volts DC) per port when connected to
external power supply‡, otherwise limited to available DMNet power (see “Power
Requirements” below)
110000--224400VV~~44..00AA 5500//6600HHzz::
(1) IEC Socket, main power input;
Mates with removable power cord, included
GG::
(1) 6-32 screw, chassis ground lug
CCOOMMPPUUTTEERR ((ffrroonntt))::
(1) USB Type B female;
USB 1.1 computer console port (6 ft cable included)
LCD Display
Green LCD dot matrix, 128 x 64 resolution, adjustable LED backlight;
Displays inputs/outputs by name, video & audio signal information,
Ethernet configuration and setup menus
Controls and Indicators
SSOOFFTTKKEEYYSS::
(4) pushbuttons for activation of LCD driven functions
HHWW--RR::
(1) recessed miniature pushbutton for hardware reset, reboots the switcher
RROOUUTTEE::
(1) pushbutton and red LED, selects ROUTE mode to allow routing changes
VVIIEEWW::
(1) pushbutton and red LED, selects VIEW mode for viewing current routes
IINNFFOO::
(1) pushbutton and red LED, selects INFO mode for viewing AV and device info
MMEENNUU::
(1) pushbutton, steps menu back one level
EENNTTEERR::
(1) pushbutton, executes highlighted menu or value
AAUUDDIIOO::
(1) pushbutton & red LED, selects audio routing view
VVIIDDEEOO::
(1) pushbutton & red LED, selects video routing view
UUSSBB::
(1) pushbutton & red LED, selects USB routing view
QQuuiicckk--AAddjjuusstt KKnnoobb::
(1) continuous turn rotary encoder, adjusts menu parameters
IINN 11 –– 88::
(8) pushbuttons and red LEDs, select input for routing
OOUUTT 11 –– 88::
(8) pushbuttons and red LEDs, select output for routing
Power Requirements
MMaaiinn PPoowweerr::
4 Amps @ 100-240 Volts AC, 50/60 Hz
AAvvaaiillaabbllee DDMMNNeett PPoowweerr::
55 Watts (2.3 Amps @ 24 Volts DC) from internal power supply
Environmental
TTeemmppeerraattuurree::
32° to 104°F (0° to 40°C)
HHuummiiddiittyy::
10% to 90% RH (non-condensing)
HHeeaatt DDiissssiippaattiioonn::
475 BTU/Hr
Enclosure
CChhaassssiiss::
Steel, black matte powder coat finish, vented sides, fan-cooled
FFaacceeppllaattee::
Extruded aluminum, black matte powder coat finish with
polycarbonate label overlay
MMoouunnttiinngg::
Freestanding or 4U 19-inch rack-mountable (adhesive feet and
rack ears included)
Dimensions
HHeeiigghhtt::
6.97 in (17.68 cm) without feet
WWiiddtthh::
17.28 in (43.90 cm), 19.0 in (48.26 cm) with ears
DDeepptthh::
18.50 in (47.00 cm)
Weight
20.0 lb (9.1 kg)
AVAILABLE ACCESSORIES
DDMMCC--HHDD
HDMI Input Card
DDMMCC--HHDD--DDSSPP
HDMI Input Card w/DSP
DDMMCC--VVIIDD--RRCCAA--AA
RCA Analog Video Input Card w/Analog Audio
DDMMCC--VVIIDD--RRCCAA--DD
RCA Analog Video Input Card w/SPDIF Audio
DDMMCC--VVIIDD44
Security Camera Input Card
DDMMCC--CCAATTOO
Quad DM Output Card
DDMMCC--CCAATTOO--HHDD
Quad DM Output Card w/HDMI
DDMM--CCBBLL--NNPP
DigitalMedia
TM
Cable, Non-Plenum
DDMM--CCBBLL--PP
DigitalMedia
TM
Cable, Plenum
DDMM--CCOONNNN
DigitalMedia
TM
Cable Connector
* Future option, not currently available.
† DVI connectivity is currently enabled via HDMI input/output ports using
third-party adapters; DVI/RGB input card coming soon.
‡ For external DMNet power, use Crestron CNPWS-75, C2N-SPWS300,
or other Cresnet power supply as required.
RReeaarr VViieeww ooff DDMM--MMDD88XX88
DM-MD8X8.qxd 1/13/09 3:53 PM Page 3
 previous