Crestron electronic GLA-PWS50 Power Supply User Manual


 
GLA-PWS50
Crestron Electronics, Inc. Installation Guide – DOC. 6734A
15 Volvo Drive Rockleigh, NJ 07647 (2022081)
Functional Summary
The GLA-PWS50 is a 50 Watt Cresnet
®
Power Supply
designed for use with a Crestron
®
Green Light™ system,
or anywhere a wall-mountable Cresnet power supply is
needed. The GLA-PWS50 mounts conveniently over a 4”
square or 2-gang electrical box. All connections are made
inside the electrical box via flying leads using twist-on
wire connectors. A partition is included to isolate high
voltage from Class 2 wiring within the box.
50 Watt Cresnet power supply
Powers the IPAC and other Cresnet devices
Provides backup power for Crestron Green Light
cabinets
Mounts to a 4” square or 2-gang electrical box
GLA-PWS50 Physical View
Specifications
GLA-PWS50 Specifications
SPECIFICATION DETAILS
Output Power
Output Power
Ripple/Noise
50 Watts (2.1 Amps) @ 24 Volts
DC, regulated, limited power
source
<1%
Power Requirements
Input
0.6 Amps @ 100-240 Volts AC,
50/60 Hz
Enclosure Metal construction, mounts to a
4-inch square or 2-gang
electrical box, includes low-
voltage partition
Environmental
Temperature
Humidity
Heat Dissipation
32° to 104°F (0° to 40°C)
10% to 90% RH
(non-condensing)
26 BTU/Hr
Dimensions
Height
Width
Depth
4.00 in (10.16 cm)
5.55 in (14.09 cm)
2.27 in (5.76 cm)
Weight 1.2 lbs (0.54 kg)
Tel: 888.CRESTRON 02.09
Fax: 201.767.7576 Specifications subject to
www.crestron.com change without notice.