Crestron electronic MPS-250 Switch User Manual


  Open as PDF
of 4
 
Output Impedance: 200 ohms balanced, 100 ohms unbalanced
Maximum Output Level: 4 V
RMS
balanced, 2 V
RMS
unbalanced
SPEAKER: (1 or 2) 2-pin 5mm detachable terminal blocks, speaker-level audio outputs
Wire Size: Connector accepts 12 AWG maximum
Output Power (MPS-250): 20W RMS per channel stereo into 8 ohms, 4 ohms tolerant
Output Power (MPS-250-70V): 40W RMS mono at 70 Volts
Output Power (MPS-250-100V): 40W RMS mono at 100 Volts
AUD IN 1 - 5: (5) 5-pin 3.5mm detachable terminal blocks, stereo line-level inputs
Input Impedance: 24k ohms balanced/unbalanced
Balanced Input Level: -20 to +12 dBV; 4 V
RMS
maximum
Unbalanced Input Level: -20 to +6 dBV; 2 V
RMS
maximum
MC/LN 1 - 2: (2) 5-pin 3.5mm detachable terminal blocks, comprises (2) mic/line inputs
Balanced Mic Input Level: -52 to -12 dBV, 240 mV
RMS
maximum
Balanced Line Input Level: -28 to +11 dBV, 3.7 V
RMS
maximum
Unbalanced Line Input Level: -34 to +5 dBV, 1.85 V
RMS
maximum
Mic Input Impedance: 3.9k ohms, accepts 60 to 600 ohm source
Line Input Impedance: 19k ohms balanced, 9.5k ohms unbalanced
Phantom Power: 10 mA (total) @ 48 Volts DC, software enabled to both mic inputs
Connectors – Video
COMP/Pb, Y/Y, C/Pr 1 - 2: (2) sets of (3) BNC female video inputs
Each set configurable as:
(1) Component/HDTV (YP
B
P
R
) video input, or
(1) S-Video (Y/C) input, or
(1) Composite input
Input Level/Impedance: 1 V
P-P
, 75 ohms, nominal
DC Offset: Insensitive to DC offset (AC coupled)
Video signal sensing on COMP/P
B
or Y/Y
RGBHV 3 - 5: (3) DB15HD female, RGBHV or Component/HDTV inputs
Format: RGBHV, RGBS, RG
S
B, or YP
B
P
R
RGB Input Level/Impedance: 1 V
P-P
, 75 ohms, nominal
Sync Input Level: 2 to 5 V
P-P
Sync Input Impedance: 75, 500, or 1k ohms individually selectable for H and V
Video signal sensing on H, G
S
, and Y; defeatable DDC pull-up resistors
QM INPUT QM 6: (1) 8-wire RJ45 female, QuickMedia input port
Signal Types: Dynamically configurable for RGBHV, component (YP
B
P
R
), S-Video (Y/C), or
composite video with stereo program and 2-channels microphone audio;
RGB Format: RGBHV, RGBS, RG
S
B
RGB Input Resolution, Non-interlaced: 1920 x 1200 maximum (60Hz limit at 1600 x 1200
or higher);
Video/HDTV Formats: NTSC or PAL, HDTV up to 1080i/1080p
Delay Skew Compensation: 0 to 22 nS
Connects to QM output of a QuickMedia device via CRESCAT-QM or CRESCAT-IM cable*
COMP/Pb OUTPUT 1: (1) BNC female
Composite video output, or P
B
of secondary component/HDTV video output;
Output Level/Impedance: 1.0 to 1.1 V
P-P
(terminated, with 1 V
P-P
input), 75 ohms nominal
Y/Y, C/Pr OUTPUT 2: (2) BNC female
S-Video (Y/C) video output, or Y and P
R
of secondary component/HDTV video output
Output Level/Impedance: 1.0 to 1.1 V
P-P
(terminated, with 1 V
P-P
input), 75 ohms nominal
COMP/Pb, Y/Y, C/Pr OUTPUT 3: (3) BNC female, configurable as:
(1) Component/HDTV (YP
B
P
R
) video output, or
(1) S-Video (Y/C) output, or
(1) Composite output
Output Level/Impedance: 1.0 to 1.1 V
P-P
(terminated, with 1 V
P-P
input), 75 ohms nominal
RGBHV OUTPUT 4: (1) DB15HD female, RGBHV or Component/HDTV output
Format: RGBHV, RGBS, RG
S
B, or YP
B
P
R
RGB Output Level: 0.7 to 0.75 V
P-P
(terminated, with 0.7 V
P-P
input, unity gain)
RGB Output Impedance: 75 ohms nominal
Sync Output Level/Impedance: 4 to 5 V
P-P
, 55 ohms
Sync Polarity: Follows input
TOUCHPANEL CH 5: (1) 8-wire RJ45 female, CAT5 balanced video output port
Dynamically configurable for component (YP
B
P
R
), S-Video (Y/C), or composite video
Video/HDTV Formats: NTSC or PAL, HDTV up to 1080i
Output Impedance: 100 ohms balanced
Connects to CH CAT5 balanced video input port of a compatible touchpanel or other
device via CresCAT cable
TOUCHPANEL QM 5: (1) 8-wire RJ45 female, QuickMedia output port
Signal Types: Dynamically configurable for RGBHV, component (YP
B
P
R
), S-Video (Y/C), or
composite video with stereo program and 2-channels microphone audio;
RGB Format: RGBHV, RGBS, RG
S
B
RGB Output Resolution, Non-interlaced: 1920 x 1200 maximum (60Hz limit at 1600 x
1200 or higher);
Video/HDTV Formats: NTSC or PAL, HDTV up to 1080i/1080p
Connects to QM input port of a compatible touchpanel or other QuickMedia device via
CresCAT-QM or CresCAT-IM cable*
Connectors – Control & Power
IR/SERIAL OUT A - D: (4) 2-pin 3.5mm detachable terminal blocks, IR/Serial output ports
IR output up to 1.2 MHz, 1-way serial TTL/RS-232 (0-5 Volts) up to 9600 baud
IR IN: (1) 3-pin 3.5mm detachable terminal block, for CNXRMIRD IR Receiver (sold
separately), allows control from IR wireless remotes using RC-5 command set
INPUT 1 - 4: (1) 5-pin 3.5mm detachable terminal block
Comprises (4) digital/contact closure inputs, rated for 0-24 Volts DC, referenced to GND
Input Impedance: 2.2k ohms pulled up to 5 Volts DC
Logic Threshold: 2.5 Volts DC nominal with 1 Volt hysteresis band
RELAY 1 - 4: (1) 8-pin 3.5mm detachable terminal block
Comprises (4) normally open, isolated relays
Rated 1 Amp, 30 Volts AC/DC, MOV arc suppression across contacts
COM A - B: (2) DB9 male, bidirectional RS-232 ports
Up to 115.2k baud, hardware and software handshaking support
LAN: (1) 8-wire RJ45 with 2 LED indicators, 10/100BaseT Ethernet port
Green LED indicates link status, yellow LED indicates Ethernet activity
Crestron MPS-250 Multimedia Presentation System 250
MPS-250
Multimedia
Presentation
System
Up to 2
Up to 3
Up to 2
LANLAN
Amplifier
 previous