Filter
Top Products
ISYS
®
TILT TOUCHPANELS
Isys
®
Tilt Touchpanel Accessories
www.crestron.com | 800.237.2041 | 201.767.3400
© 2007 Specifications subject to change without notice
tilt touchpanels
INTERFACE MODULES AND CABLES
TPS-IMPC Isys
®
Interface Module
The TPS-IMPC is an interface module that is included
as standard with every Isys TPS-3000 and TPS-4000
tilt touchpanel. Additional interface modules may be
purchased and installed to facilitate connectivity for a
single non-stationary touchpanel at multiple locations.
The interface module connects to the touchpanel
using a “siamese” interface cable (included with the
touchpanel or sold separately). Installed neatly out
of view near the touchpanel, the interface module
provides all of the conventional connections for
power, Cresnet, audio, and video signals.
SPECIFICATIONS
Connectors
NET: (1) 4-pin 5mm detachable terminal block
Connects to Cresnet control network
24VDC: (1) 24 Volt DC power jack (PW-2420RU power
supply optional, sold separately);
Powers touchpanel and module in lieu of Cresnet power
NET/VIDEO TO PANEL: (1) 10-pin RJ45 female, shielded
Connects to touchpanel via “siamese” cable (included
with touchpanel);
Contains Cresnet data, 24 Volts DC power, ground, and
video signals
AUDIO TO PANEL: (1) 8-pin RJ45 female, shielded
Connects to touchpanel via “siamese” cable (included
with touchpanel);
Contains stereo audio input and mic out signals
AUDIO INPUT: (1) 6-pin 3.5mm detachable terminal block
Balanced/unbalanced stereo line-level input
Input Impedance: 20k ohms balanced, 10k ohms
unbalanced;
Maximum Input Level: 4 V
RMS
balanced, 2 V
RMS
unbalanced
MIC OUT: (1) 3-pin 3.5mm detachable terminal block
Balanced/unbalanced mono line-level output
Output Impedance: 600 ohms balanced, 300 ohms
unbalanced;
Maximum Output Level: 2 V
RMS
balanced, 1 V
RMS
unbalanced
NTSC/PAL VIDEO (Coaxial): (2) BNC female
Comprises (1) composite or S-Video input
Input Impedance: 75 ohms
NTSC/PAL VIDEO (Balanced): (1) 6-pin 3.5mm detachable
terminal block;
Comprises (1) composite or S-Video input, balanced
Connects to any Crestron CAT5 balanced video source
Input Impedance: 100 ohms
DIP Switches
BAL/COAX: Selects between balanced or coaxial
video inputs
Power Requirements
24VDC: <1 Watt @ 24 Volts DC – not including touchpanel
(PW-2420RU power supply sold separately)
Cresnet Power Usage: <1 Watt @ 24 Volts DC – not
including touchpanel
Note: If power is applied to the 24VDC jack and the NET port
simultaneously, power will be drawn from whichever is
highest.
Environmental
Temperature: 41° to 113°F (5° to 45°C)
Humidity: 10% to 90% RH (non-condensing)
Enclosure
Black metal, surface mount box with (2) integral
mounting flanges
Dimensions
Height: 1.25 in (3.18 cm)
Width: 5.82 in (14.79 cm)
Depth: 3.50 in (8.89 cm)
Weight
12.5 oz (0.36 kg)
51