Filter
Top Products
PR711FL User’s Manual
17
Edges of display are curved
inward or outward.
Refer to "Controls and Adjustments." You need
to adjust the "Side Pincushion."
No Plug & Play.
Verify that the host system is Plug & Play
compatible.
Check to see if Windows is installed, and the
software key for the Data Display Channel
(DDC) function is enabled.
Determine if original manufacturer's detachable
signal cable is being used (D-Sub-15 pin only).
Our monitor is build-in FD Trinitron® CRT. This CRT is sensitive to shocks and vibrations that
may occur during transportation. Following are some adjustment tips when below mentioned
symptoms occur.
Symptom Tip
Two horizontal lines are visible
on the screen
This is normal characteristic of FD Trinitron®
CRT.
These are damper wires, which are attached to
the aperture grille and are designed to dampen
and prevent shock and vibrate to the aperture
grille.