CyberPower Systems OP650 Power Supply User Manual


 
OP650
Guaranteed Uninterruptible Power System
Power Switch
Press the power button to turn the UPS ON or OFF
Power On Indicator
This LED is illuminated when the utility condition is normal and
the UPS outlets are providing “clean power”, free of surges and
spikes
Using Battery Indicator
This illuminates during utility failure, indicating that the battery is
supplying power to the battery-power supplied outlets.
BOOST Indicator
This LED indicates that the UPS is operating in automatic
voltage regulation mode. When the led is flashed in rotation, it
indicates that the UPS unit boosts input voltage.
Buck Indicator
This LED indicates that the UPS is operating in automatic
voltage regulation mode. When the led is illuminated
continuously, it indicates input over-voltage and the UPS unit
bucks the voltage.
Battery Backup and Surge Protection Outlets
Provides three battery powered and surge protected outlets for
connected equipment to insure temporary uninterrupted
operation during a power failure and against surges and spikes.
Surge Protection Outlets
Provides three surge protected only outlets for connected
equipment against surges and spikes
Wiring Fault Indicator
This LED indicator will illuminate to warn the user that a wiring
problem exits with the AC outlet, such as bad ground, miss
ground or reversed wiring. If this is illuminated, the user is
advised to disconnect all electrical equipment from the outlet
and have an electrician check the outlet to insure proper wiring.
3