Filter
Top Products
PowerPanel
®
Business Edition
Copyright © 2006-2007 Cyber Power Systems, Inc. All rights reserved. 19
Leaves bypass
mode
Leaves bypass mode and switch to line mode or battery
mode, battery power will be used.
Battery-test is
successful
The Battery test was successful, battery power is normal.
Battery-test
initiated
The Battery test initiated to verify that battery power can
be provided normally.
Battery is charging The battery starts to charge, the battery capacity will
increase.
Battery stopped
charging
The battery stopped charging, the battery capacity will
stop increasing.
Battery is
discharging
The battery is being discharged, the battery capacity will
decrease.
Battery stopped
discharging
Battery stopped discharging; the battery capacity will
stop decreasing.
Calibration initiated Calibration was initiated; the battery runtime will be
evaluated.
Calibration finished Calibration finished, battery power no longer is used.
Calibration canceled
Calibration was canceled; the battery runtime evaluation
was interrupted.
Output voltage is
boosted
Output voltage is boosted from a lower level.
Output voltage is no
longer be boosted
Output voltage is normal and the boost will stop.
Output voltage is
bucked
Output voltage is bucked from a higher level.
Output voltage is no
longer be bucked
Output voltage is normal and the buck will stop.
Battery capacity is
normal
The battery capacity is normal and no longer critically
low.
Battery Backup is
no longer faulty
The battery backup is no longer faulty and is working
normally.
Utility power has
restored
Utility power has restored, no longer using battery power.