Filter
Top Products
3. Connection to the Computer
GDR 15L Model
Using the following simple instructions, the GDR 15L will be installed and
configured within about five minutes.
On the bottom of the GDR 15L, there are two ports—a 15-pin VGA port, and
a power jack. One end of the VGA cable will already be connected to the
VGA port when the unit is shipped.
3.1 Turn off the computer.
3.2 Attach the VGA cable to the video port on the PC and ensure that both
thumbscrew connections are securely fastened.
3.3 Insert the power jack on the power supply into the remaining circular
port on the monitor, and connect the power supply to an outlet using
the IEC power lead.
3.4 Turn on the computer.
3.5 Turn on the display.
3.6 The display has not yet been configured, so the picture quality may
not yet be optimized.
GDR 15L-TR Touchscreen Model
In addition to the above, the touchscreen model has an extra cable
terminating in a 9-pin serial connector which connects to one of the PC’s
serial ports.
Power, VGA, & Touchscreen connectors on bottom of unit.
CyberResearch
®
Displays GDR 15L Series
CyberResearch, Inc. 3
25 Business Park Drive P: (203) 483-8815; F: (203) 483-9024
Branford, CT USA www.cyberresearch.com