Cypress CY7C107BN Computer Hardware User Manual


  Open as PDF
of 7
 
CY7C107BN
CY7C1007BN
Document #: 001-06426 Rev. ** Page 6 of 7
© Cypress Semiconductor Corporation, 2006. The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use
of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be
used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its
products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress
products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.
All product or company names mentioned in this document may be the trademarks of their respective holders.
Package Diagrams
51-85032-*B
PIN1 I.D
.435
.395
.445
.405
.128
.148
.360
.380
.026
.015
.032
.020
DIMENSIONS ININCHES
MIN.
MAX.
.025 MIN.
.007
.013
.050
TYP.
.720
.730
114
15 28
0.004
SEATING PLANE
51-85032.*B
28-Lead (400-Mil) Molded SOJ (51-85032)
MIN.
MAX.
PIN1 ID
0.291
0.300
0.050
TYP.
0.007
0.013
0.330
0.350
0.120
0.140
0.025MIN.
0.262
0.272
0.697
0.713
0.013
0.019
0.014
0.020
0.032
0.026
A
A
DETAIL
EXTERNALLEAD DESIGN
OPTION1 OPTION2
114
15 28
0.004
SEATINGPLANE
NOTE:
1.JEDEC STDREF MO088
2.BODY LENGTHDIMENSION DOESNOTINCLUDE MOLDPROTRUSION/END FLASH
MOLDPROTRUSION/END FLASHSHALL NOTEXCEED0.006 in(0.152 mm)PER SIDE
3.DIMENSIONS ININCHES
51-85031-*C
28-Lead (300-Mil) Molded SOJ (51-85031)
[+] Feedback
 previous