Filter
Top Products
CY7C1329H
Document #: 38-05673 Rev. *B Page 15 of 16
© Cypress Semiconductor Corporation, 2006. The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use
of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be
used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its
products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress
products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.
i486 is a trademark, and Intel and Pentium are registered trademarks, of Intel Corporation. PowerPC is a registered trademark
of IBM Corporation. All product and company names mentioned in this document may be trademarks of their respective holders.
Ordering Information
“Not all of the speed, package and temperature ranges are available. Please contact your local sales representative or
visit www.cypress.com
for actual products offered”.
Speed
(MHz) Ordering Code
Package
Diagram Package Type
Operating
Range
166 CY7C1329H-166AXC 51-85050 100-pin Thin Quad Flat Pack (14 x 20 x 1.4 mm) Lead-Free Commercial
CY7C1329H-166AXI 100-pin Thin Quad Flat Pack (14 x 20 x 1.4 mm) Lead-Free Industrial
133 CY7C1329H-133AXC 100-pin Thin Quad Flat Pack (14 x 20 x 1.4 mm) Lead-Free Commercial
CY7C1329H-133AXI 100-pin Thin Quad Flat Pack (14 x 20 x 1.4 mm) Lead-Free Industrial
Package Diagram
NOTE:
1.JEDECSTDREFMS-026
2.BODYLENGTHDIMENSIONDOESNOTINCLUDEMOLDPROTRUSION/ENDFLASH
MOLDPROTRUSION/ENDFLASHSHALLNOTEXCEED0.0098in(0.25mm)PERSIDE
3.DIMENSIONSINMILLIMETERS
BODYLENGTHDIMENSIONSAREMAXPLASTICBODYSIZEINCLUDINGMOLDMISMATCH
0.30±0.08
0.65
20.00±0.10
22.00±0.20
1.40±0.05
12°±1°
1.60MAX.
0.05MIN.
0.60±0.15
0° MIN.
0.25
0°-7°
(8X)
STAND-OFF
R0.08MIN.
TYP.
0.20MAX.
0.15MAX.
0.20MAX.
R0.08MIN.
0.20MAX.
14.00±0.10
16.00±0.20
0.10
SEEDETAIL
A
DETAIL
A
1
100
30
31 50
51
80
81
GAUGEPLANE
1.00REF.
0.20MIN.
SEATINGPLANE
100-pin TQFP (14 x 20 x 1.4 mm) (51-85050)
51-85050-*B
[+] Feedback