Filter
Top Products
CY7C6431x
CY7C64345, CY7C6435x
Document Number: 001-12394 Rev *G Page 15 of 28
Electrical Characteristics
Absolute Maximum Ratings
Storage Temperature (T
STG
)
(3)
-55
o
C to 125
o
C (Typical +25
o
C)
Supply Voltage Relative to Vss (Vdd)............. -0.5V to +6.0V
DC Input Voltage (V
IO
)....................Vss - 0.5V to Vdd + 0.5V
DC Voltage Applied to Tri-state (V
IOZ
)Vss - 0.5V to Vdd + 0.5V
Maximum Current into any Port Pin (I
MIO
). -25mA to +50 mA
Electrostatic Discharge Voltage (ESD)
(4)
....................2000V
Latch-up Current (LU)
(5)
.......................................... 200 mA
Operating Conditions
Ambient Temperature (T
A
)..................................0
o
C to 70
o
C
Operational Die Temperature (T
J
)
(6)
...................0
o
C to 85
o
C
DC Electrical Characteristics
DC Chip Level Specifications
Table 9 lists guaranteed maximum and minimum specifications for the entire voltage and temperature ranges.
Notes
3. Higher storage temperatures reduce data retention time. Recommended storage temperature is +25°C ± 25°C. Extended duration storage temperatures above 85
o
C
degrade reliability.
4. Human Body Model ESD.
5. According to JESD78 standard.
6. The temperature rise from ambient to junction is package specific. See Package Handling on page 25. The user must limit the power consumption to comply with this
requirement.
Table 9. DC Chip Level Specifications
Parameter Description Conditions Min Typ Max Units
Vdd Supply Voltage See table titled DC POR and LVD
Specifications on page 17.
3.0 – 5.5 V
I
DD24,3
Supply Current, IMO = 24 MHz Conditions are Vdd = 3.0V, T
A
= 25
o
C,
CPU = 24 MHz,
No USB/I2C/SPI.
– – 3.1 mA
I
DD12,3
Supply Current, IMO = 12 MHz Conditions are Vdd = 3.0V, T
A
= 25
o
C,
CPU = 12 MHz,
No USB/I2C/SPI.
– – 2.0 mA
I
DD6,3
Supply Current, IMO = 6 MHz Conditions are Vdd = 3.0V, T
A
= 25
o
C,
CPU = 6 MHz,
No USB/I2C/SPI.
– – 1.5 mA
I
SB1,3
Standby Current with POR, LVD, and
Sleep Timer
Vdd = 3.0V, T
A
= 25
o
C, I/O regulator
turned off.
– – 1.5 μA
I
SB0,3
Deep Sleep Current Vdd = 3.0V, T
A
= 25
o
C, I/O regulator
turned off.
– 0.1 – μA
I
DD24,5
Supply Current, IMO = 24 MHz Conditions are Vdd = 5.0V, T
A
= 25
o
C,
CPU = 24 MHz,
No USB/I2C/SPI.
– mA
I
DD12,5
Supply Current, IMO = 12 MHz Conditions are Vdd = 5.0V, T
A
= 25
o
C,
CPU = 12 MHz,
No USB/I2C/SPI.
– mA
I
DD6,5
Supply Current, IMO = 6 MHz Conditions are Vdd = 5.0V, T
A
= 25
o
C,
CPU = 6 MHz,
No USB/I2C/SPI.
– mA
I
SB1,5
Standby Current with POR, LVD, and
Sleep Timer
Vdd = 5.0V, T
A
= 25
o
C, I/O regulator
turned off.
– μA
I
SB0,5
Deep Sleep Current Vdd = 5.0V, T
A
= 25
o
C, I/O regulator
turned off.
– – μA
[+] Feedback