Filter
Top Products
CYV15G0100EQ
Document Number: 001-12520 Rev. ** Page 5 of 10
Maximum Ratings
Exceeding maximum ratings may shorten the useful life of the
device. These user guidelines are not tested.
Storage Temperature.................................. –65°C to +150°C
Ambient Temperature with
Power Applied ............................................ –55°C to +125°C
Supply Voltage to Ground Potential................–0.5V to +3.8V
DC Voltage Applied to Outputs
in High Z State....................................... –0.5V to V
CC
+ 0.5V
DC Input Voltage .....................................–0.5V to V
CC
+0.5V
Electro Static Discharge (ESD) HBM.......................> 2000 V
(JEDEC EIA/JESD-A114A)
Latch Up Current ....................................................> 200 mA
Power Up Requirements
The CYV15G0100EQ contains one power supply. The voltage
on any input or IO pin must not exceed the power pin during
power up.
Operating Range
Range
Ambient
Temperature
V
CC
Commercial 0°C to +70°C +3.3V ±5%
DC Electrical Characteristics
Parameter Description Test Conditions Min Typ Max Unit
V
CC
Supply Voltage
[1]
– 3.135 3.3 3.465 V
P
D
Power Consumption
[2]
– 125 160 190 mW
I
S
Supply Current
[1]
– 38 48 60 mA
V
CMOUT
Output Common Mode Voltage
[1]
Load = 50Ω – V
CC
– ΔV
SDO
/2
= 2.9
– V
V
CMIN
Input Common Mode Voltage
[1]
(Bypass = High)
– 1 1.4 V
Input Common Mode Voltage
[1]
(Bypass = Low)
– 0 2.9 V
– CLI DC Voltage (0m)
[1]
– 2.2 2.65 2.95 V
– CLI DC Voltage (No Signal)
[1]
– 1.5 1.9 2.3 V
– Floating MCLADJ DC Voltage
[1]
– 1.3 V
– MCLADJ Range
[3]
– 0.4 0.72 1.02 V
V
CD/MUTE(OH)
CD/MUTE Output Voltage
[1]
Carrier Not Present 2.8 – – V
V
CD/MUTE(OL)
Carrier Present – – 0.8 V
V
CD/MUTE
CD/MUTE Input Voltage Required to
Force Outputs to Mute
[1]
Min to Mute 2.5 – – V
V
CD/MUTE
CD/MUTE Input Voltage Required to
Force Active
[1]
Max to Activate – – 1 V
Notes
1. Production test.
2. Calculated results from production test.
3. Not tested. Based on characterization.
[+] Feedback [+] Feedback