Filter
Top Products
STK14CA8
Document Number: 001-51592 Rev. ** Page 3 of 16
Absolute Maximum Ratings
Voltage on Input Relative to Ground.................–0.5V to 4.1V
Voltage on Input Relative to V
SS
...........–0.5V to (V
CC
+ 0.5V)
Voltage on DQ
0-7
or HSB......................–0.5V to (V
CC
+ 0.5V)
Temperature under Bias............................... –55°C to 125°C
Junction Temperature................................... –55°C to 140°C
Storage Temperature.................................... –65°C to 150°C
Power Dissipation.............................................................1W
DC Output Current (1 output at a time, 1s duration)....15 mA
NF (SOP-32) PACKAGE THERMAL CHARACTERISTICS
θ
jc
5.4 C/W; θ
ja
44.3 [0fpm], 37.9 [200fpm], 35.1 C/W [500fpm].
RF (SSOP-48) PACKAGE THERMAL CHARACTERISTICS
θ
jc
6.2 C/W; θ
ja
51.1 [0fpm], 44.7 [200fpm], 41.8 C/W [500fpm].
Note: Stresses greater than those listed under Absolute
Maximum Ratings may cause permanent damage to the device.
This is a stress rating only, and functional operation of the device
at conditions above those indicated in the operational sections
of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
reliability.
DC Characteristics
(V
CC
= 2.7V to 3.6V)
Note The HSB
pin has I
OUT
=-10 uA for V
OH
of 2.4 V, this parameter is characterized but not tested.
Symbol Parameter
Commercial Industrial
Units Notes
Min Max Min Max
I
CC
1
Average V
CC
Current 65
55
50
70
60
55
mA
mA
mA
t
AVAV
= 25 ns
t
AVAV
= 35 ns
t
AVAV
= 45 ns
Dependent on output loading and cycle
rate. Values obtained without output loads.
I
CC
2
Average V
CC
Current during
STORE
3 3 mA All Inputs Don’t Care, V
CC
= max
Average current for duration of STORE
cycle (t
STORE
)
I
CC
3
Average V
CC
Current at t
AVAV
=
200 ns
3V, 25°C, Typical
10 10 mA W
≥
(V
CC
– 0.2V)
All Other Inputs Cycling at CMOS Levels
Dependent on output loading and cycle
rate. Values obtained without output loads.
I
CC
4
Average V
CAP
Current during
AutoStore Cycle
3 3 mA All Inputs Don’t Care
Average current for duration of STORE
cycle (t
STORE
)
I
SB
V
CC
Standby Current
(Standby, Stable CMOS Levels)
33mAE
≥ (
V
CC
-0.2V)
All Others V
IN
≤
0.2V or
≥
(V
CC
-0.2V)
Standby current level after nonvolatile
cycle complete
I
ILK
Input Leakage Current ±1 ±1 μAV
CC
= max
V
IN
= V
SS
to V
CC
I
OLK
Off-State Output Leakage
Current
±1 ±1 μAV
CC
= max
V
IN
= V
SS
to V
CC
, E or G
≥
V
IH
V
IH
Input Logic “1” Voltage 2.0 V
CC
+0.3 2.0 V
CC
+0.3 V All Inputs
V
IL
Input Logic “0” Voltage V
SS
–0.5 0.8 V
SS
–0.5 0.8 V All Inputs
V
OH
Output Logic “1” Voltage 2.4 2.4 V I
OUT
= –2 mA
V
OL
Output Logic “0” Voltage 0.4 0.4 V I
OUT
= 4 mA
T
A
Operating Temperature 0 70 –40 85
°
C
V
CC
Operating Voltage 2.7 3.6 2.7 3.6 V 3.3V + 0.3V
V
CAP
Storage Capacitance 17 120 17 120 μFBetween V
CAP
pin and V
SS
, 5V rated.
NV
C
Nonvolatile STORE operations 200 200 K
DATA
R
Data Retention 20 20 Years At 55
°
C
[+] Feedback