![](http://pdfasset.owneriq.net/c/a3/ca3c362c-5cb6-4141-9492-e11b96b317bc/ca3c362c-5cb6-4141-9492-e11b96b317bc-bg8d.png)
Standard 2 of 5
Product Reference Guide
5-65
Standard 2 of 5 — continued
Length Control
Fixed Length Decoding—
When fixed length decoding is enabled, the scanner will decode a
bar code if the label length matches one of the configurable fixed lengths.
Variable Length Decoding—
When variable length decoding is enabled, the scanner will
decode a bar code if the label length falls in the range of the configurable minimum and maxi-
mum length.
Configuring Fixed Length Decoding:
1. Scan the START/END bar code.
2. Scan the Fixed Length Decoding bar code.
3. Scan the START/END bar code.
4. Set Length 1 to the first fixed length by following the
Standard 2 of 5 Length 1, Length 2
Programming Instructions
below.
5. Set Length 2 to the second fixed length (or to ‘000’ if there is only one fixed length) by
following the Standard 2 of 5 Length 1, Length 2 Programming Instructions below.
Configuring Variable Length Decoding:
1. Scan the START/END bar code.
2. Scan the Variable Length Decoding bar code.
3. Scan the START/END bar code.
4. Set Length 1 to the first variable length by following the
Standard 2 of 5 Length 1, Length 2
Programming Instructions
below.
5. Set Length 2 to the second variable length by following the
Standard 2 of 5 Length 1, Length
2 Programming Instructions below.
START / END
PROGRAMMING BAR CODES
Variable Length Decoding
DEFAULT
Fixed Length Decoding