Datalogic Scanning F725-E Series Barcode Reader User Manual


 
F725-E SERIES TERMINALS
26
5
5 TROUBLESHOOTING
PROBLEM CAUSE REMEDY
Flat batteries. Recharge terminal. When the trigger is
pressed the
terminal does not
come on.
Batteries completely
flat or broken.
Replace batteries.
Flat batteries. Recharge terminal. When the trigger is
pressed, the
terminal displays
the message
BATTERY LOW
and switches itself
off.
Batteries completely
flat or broken.
Replace batteries.
There is no power
supply to the cradle.
Connect the power
supply and switch
on the cradle.
The serial cable is
not correctly
connected.
Check the
connection to the
cradle and the
serial port of the
computer.
The terminal does
not load the
application program.
The terminal already
contains an
application program.
Follow instructions
to cancel the
application.
The application
loaded is not suitable
for the terminal in
use. The terminal
displays the
message FAULT
CODE P21CO4.
Load the correct
application
program.
The terminal
displays an error
message FAULT
CODE.P21CO4.
Other faults. The
terminal displays an
error message other
than FAULT CODE
P21CO4.
Contact your
Datalogic
representative for
technical
assistance.