1.0 SCOPE :
This guide is intended for use with DATALOGIC products supporting the Universal Wedge interface. The information in this guide includes :
PC or Terminal Model : (PC or Terminal model and Manufacturer).
Keyboard Type ID: (This number entered into the wedge configuration for the proper PC / Terminal emulation by country),
DATALOGIC terminal cable part number : (DATALOGIC part number for ordering, call your DATALOGIC Sale Representative for availability of cables)
Single Cable Option : (Designates if a single cable connection is available, see table 1b),
Product minimum wedge software version : (The minimum WEDGE firmware version required to support the listed PCs and Terminals by product. No firmware listing designates no support)
2.0 CABLING :
Cables for connecting your DATALOGIC scanner to the listed PC / Terminal can be accomplished in one of two ways:
Scanner base cable and terminal cable. (base cable will connect to the various terminal cables listed on pages 2-10.) DATALOGIC single cable option.
Minicomputer
Keyboard
Terminal Cable
Scanner Base Cable
Scanner
Mi ni comput er
Keyboard
Datalogic Single Cable
Scanner
Product(s) Scanner Base Cable for use with cables listed on pages 4-15.
Part Number Description
DATALOGIC single cable options (except where noted)
Part Number Desciption
VS1000 w/ STI Interface
VS1200 w/ STI Interface
HS1250 w/ STI Interface
SP400RF w/ STI Interface
8-0203-01 12' base cable, 25 pin "D" connector.
None
SP400 WorldWideWedge
8-0177-01 12' base cable, 25 pin "D" connector base cable, Power off external AC adapter option.
8-0119-01 8', 9 pin "D" connector, Socket, Power off the terminal, Indirect-connect for IBM (or compatible) computer
type PC/AT through "Y" cable 8-0120-01 or 8-0120-02. (This option is a two cable solution.)
QS6000+ Universal Wedge
8-0424-15 15' base cablew/ext. AC power option. 8-0424-08 IBM PC AT/DATALOGIC, POT, KBW, 11’
DUET Universal Wedge
VS800 Universal Wedge
8-0466-11 12' base cable, 25 pin "D" connector, Socket, Power off external AC power adapter ONLY. 8-0466-04 8', 5 pin "Din" connector, Plug (Computer end), 6 pin "Mini Din" connector, Socket (Keyboard end), Power
off external brick, Direct-connect for Universal PC application using Adapter cable # 2103-0035 (5 pin to
6 Mini pin). (For XT/AT applications only)
PowerScan UW
QS1000 UW
8-0424-16 12' base cable, 25 pin ‘D’ connector, socket w/ power off external AC power adapter option. 8-0424-08 IBM PC AT/PS2, POT, KBW, 11’. (For XT/AT applications only)
Table 1a. Table 1b.
Page 3
F (1) = France Type I, F (2) = France Type II ,USA = Untited States ,D = Germany ,B = Belgium ,UK = England ,ALT = ALT mode ,I = Italy ,CH = Swiss ,S = Sweden ,E = Spain ,H = Hungary. *: Requires +5 volt or standard product power supply.
INTL = France International , J = Japan , DK = Denmark , PO = Portugal ,IL = Israel , PL = Poland , NO = Norway ,