Filter
Top Products
6
Functions - Front Panel
1.
Each monitor has a two color tally light indicator which can
be connected to the Datavideo RMC 140, SE500 or similar
products. AMBER indicates Cued and RED indicates Live.
2.
Each Monitor has individual adjustments for Brightness,
Contrast, Color and Tint (Tint is for NTSC only).
These four adjustments can be adjusted with a X headed
screwdriver.
It is recommended that you use a Test Pattern to adjust the
monitors.
3.
The ASPECT button switches the aspect ratio from 16:9 and
4:3.
4.
Source select switches between video input 1 and video
input 2. (Each monitor has a choice of two video inputs)
5.
Power On / Off switches the monitor On or Off
On either side of the TLM-702 are small Allen Key screw
tension adjustments. These alter the tension on the pivoting
mechanism. If you want to change the angle of the monitors,
i.e. aim them up or down, you can loosen these screws and
adjust the TLM-702. Once you have set the correct angle
tighten the screws back up.