Filter
Top Products
Replacing the Battery-
Connector Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer. After working inside your
computer, follow the instructions in After Working Inside Your
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Align the screw holes on the battery-connector board with the screw
holes on the computer base.
2 Press the battery-connector board down into position.
3 Replace the screws that secure the battery-connector board to the
computer base.
Post-requisites
1 Replace the palm rest.
2 Replace the keyboard.
3 Follow the procedures from step 4 to step 5 in replacing the optical drive.
4 Follow the procedures from step 3 to step 5 in replacing the hard drive.
5 Replace the base cover.
6 Replace the battery.
52