Filter
Top Products
3. Route the speaker cable in the routing guides on the computer base.
4. Connect the speaker cable to the connector on the system board.
5. Replace the four screws that secure the two speakers to the computer base.
6. Replace the palm rest (see Replacing the Palm Rest).
7. Replace the keyboard (see Replacing the Keyboard).
8. Replace the power button panel (see Replacing the Power Button Panel).
9. Replace the module cover (see Replacing the Module Cover).
10. Replace the optical drive (see Replacing the Optical Drive).
11. Replace the battery (see Replacing the Battery).
Back to Contents Page
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.