Dell 2007FP Computer Monitor User Manual


 
OSD Warning Messages

Back
Mode
When selected PIP
PIP Source
PIP Position
PIP Size
PIP Contrast
PIP Hue/Tint
PIP Saturation
Exit Menu
input)
or
NOTE:
When using DVI source, the contrast adjustment is not
available.
Push to select Back to go back to the main menu.
There is one mode: PIP (Picture in Picture)
Use and tobrowseand to select "Off" or "PIP".
When PIP on, choose "SWAP" to switch the main-screen and sub-screen in PIP mode.
Select an input signal for PIP. (VGA/DVI/S-Video/Composite)
Use and tobrowseand to select.
Select PIP window position.
Use and tobrowseand to select.
Select PIP window size.
Use and tobrowseand to select.
Adjust the contrast level of the picture in PIP Mode.
reduce the contrast
increases the contrast
This function shifts the color of PIP image to green or purple. This is used to adjust for desired flesh tone color.
shifts image color towards green
shifts image color towards purple
Adjust the color saturation of PIP image.
makes the image look more monochrome
makes the image look more colorful
Push to exit the OSD main menu.
When the monitor does not support a particular resolution mode you will see the following