Dell 2300 Projector User Manual


  Open as PDF
of 5
 
Instructional Technology Department
4/22/2005
Connecting to a desktop
• Blue VGA cable between
computer & Video In on
projector.
• Monitor cable to Video out on
Projector.
• Power cables for all 3
components.
• USB to USB (Optional for using
some remote control features).
Connecting to other devices? Check this Dell web site.
http://support.dell.com/support/edocs/acc/2300MP/en/install.htm#1
Part C: Powering On/Off
NOTE: Place projector approximately 10 feet from the screen. Turn on the projector before you
turn on the source.
Powering on procedures
1. Remove the lens cap.
2.
Plug in the power cord and appropriate signal cable. The power button light will blink green.
3. Press the power. The Dell logo will be displayed for 30 seconds.
4. Turn on your source (computer, notebook, DVD, etc.). The projector automatically detects
your source.
NOTE: If you are connecting multiple sources to the projector simultaneously or if computer is
not found, press the Source button on the remote control or control panel to select the desired
source.
 previous