Filter
Top Products
Error Messages Description
Restart the computer. If the error appears
again,
contact Dell
.
THE FILE BEING COPIED IS TOO LARGE
FOR THE DESTINATION DRIVE
The file that you are trying to copy is too
large to fit on the disk, or the disk is full.
Try copying the file to a different disk or
use a larger capacity disk.
A FILENAME CANNOT CONTAIN ANY OF
THE FOLLOWING CHARACTERS: \ / : * ? " <
> | -
Do not use these characters in filenames.
GATE A20 FAILURE A memory module may be loose. Reinstall
the memory modules and, if necessary,
replace them.
GENERAL FAILURE The operating system is unable to carry
out the command. The message is usually
followed by specific information. For
example, Printer out of paper. Take the
appropriate action.
HARD-DISK DRIVE CONFIGURATION
ERROR
The computer cannot identify the drive
type. Shut down the computer, remove the
hard drive, and boot the computer from a
optical drive. Then, shut down the
computer, reinstall the hard drive, and
restart the computer. Run the Hard Disk
Drive tests in the Dell Diagnostics.
HARD-DISK DRIVE CONTROLLER FAILURE
0
The hard drive does not respond to
commands from the computer. Shut down
the computer, remove the hard drive, and
boot the computer from a optical drive.
Then, shut down the computer, reinstall
the hard drive, and restart the computer. If
the problem persists, try another drive.
Run the Hard Disk Drive tests in the Dell
Diagnostics.
HARD-DISK DRIVE FAILURE The hard drive does not respond to
commands from the computer. Shut down
the computer, remove the hard drive, and
54