Filter
Top Products
140 | Replacing the Display Panel
15 Route the display-power, LVDS, and touchscreen cables through their routing
guides and replace the plastic shield.
16 Route the camera and infrared-module cables through their routing guides and
connect the cables to the system board.
17 Route the wireless-antenna cables through their routing guides and connect the
antenna cables to the wireless mini-card.
18 Route the speaker cables through their routing guides and connect the speaker
cable to the system board.
19 Route the power-button cable through its routing guides and connect the
power-button cable to the system board.
20 Connect the display-backlight cable to the display assembly.
21 Replace the screw that secures the grounding cable to the processor cooling-vents.
22 Replace the screw that secures the grounding cable from the right-speaker mesh
to the middle cover.
Postrequisites
1 Replace the inner frame. See "Replacing the Inner Frame" on page 97.
2 Replace the processor heat-sink fan. See "Replacing the Processor Heat-Sink Fan"
on page 77.
3 Replace the trim cover. See "Replacing the Trim Cover" on page 89.
4 Replace the system-board shield. See "Replacing the System-Board Shield" on
page 33.
5 Replace the stand. See "Replacing the Stand" on page 49.
6 Replace the back cover. See "Replacing the Back Cover" on page 21.
OM_Book.book Page 140 Friday, April 27, 2012 3:23 PM