Filter
Top Products
36 | Removing the System Board
Procedure
NOTE: Replacing the system board removes any changes you have made to the
BIOS using System Setup. Enter the Service Tag of your computer in the BIOS and
make the desired changes again after you replace the system board.
For
more information on entering the Service Tag in the BIOS, see "Replacing the
System Board" on page 39.
NOTE: Before disconnecting the cables from the system board, note the location
of the connectors so that you can reconnect them correctly after you replace the
system board.
1 Disconnect the speaker cable from the system board.
2 Gently lift the right speaker to remove it from the alignment posts and place it on
the palm rest.
1 speaker cable 2 right speaker
2
1