Filter
Top Products
Installing the Camera
1. Insert the camera into its place on the display assembly.
2. Connect the camera cable to its connector on the display assembly.
3. Install the:
a. display bezel
b. display assembly
c. battery
d. base cover
4. Follow the procedures in After Working Inside Your Computer.
Removing the Power-Connector Port
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the:
a. base cover
b. battery
c. display assembly
3. Perform the following steps:
a. Disconnect the power-connector port cable from its connector on the system board [1].
b. Remove the power-connector port from the computer [2].
18